Best price for Slice Engineering GammaMaster Nozzle 0.8mm / RepRap (V6)
Best verified price
6.0% above the recorded typical price of $24.99.
$1.50 above the lowest price UponSale has recorded.
3 stores compared · 1 fresh offer · last market update 1d ago
We score a price only against history we recorded ourselves. Until then this product shows its market range instead of a number we would be inventing.
You will be taken to filastruder.com. UponSale does not process payments and does not sell this product.
Market summary
UponSale currently tracks this product at 3 stores. The lowest verified price among 1 fresh offer is $26.49. That is 6.0% above its recorded median of $24.99.
Current prices for Slice Engineering GammaMaster Nozzle 0.8mm / RepRap (V6)
3 stores tracked| Store | Match | Item price | Shipping | Total | Stock | Freshness | Action |
|---|---|---|---|---|---|---|---|
| FilastruderBest verified filastruder.com | 0.8mm · New | $26.49 | unknown | $26.49 + ship | In stock | Checked 6h ago | View offer |
| Ultimate 3D Printing Store ultimate3dprintingstore.com | 0.8mm · New | $24.99 | unknown | $24.99 + ship | In stock | Price may be stale | View offer |
| HartSmart Products hartsmartproducts.com | 0.8mm · New | $24.99 | unknown | $24.99 + ship | In stock | Price may be stale | View offer |
Ranked by the lowest comparable price among offers that pass our freshness, variant and anomaly checks. Where a store does not publish a shipping cost we say so rather than assuming it is free. All amounts are the store’s own published prices at the time shown.
Specifications
2 stated- Technology
- FDM
- Nozzle
- 0.8 mm2 stores
What retailers state about Slice Engineering GammaMaster Nozzle 0.8mm / RepRap (V6), normalised by UponSale. Confirm anything that matters on the retailer’s own page before buying.
Slice Engineering GammaMaster Nozzle 0.8mm / RepRap (V6) price history
Recorded by UponSaleOver the 2 days UponSale has been recording this product, prices for Slice Engineering GammaMaster Nozzle 0.8mm / RepRap (V6) ran from $24.99 to $24.99. The current lowest verified price is $26.49 and the recorded median is $24.99.
Over the 2 days UponSale has been recording this product, prices for Slice Engineering GammaMaster Nozzle 0.8mm / RepRap (V6) ran from $24.99 to $24.99. The current lowest verified price is $26.49 and the recorded median is $24.99.
Is Slice Engineering GammaMaster Nozzle 0.8mm / RepRap (V6) a good deal today?
Buy now or wait?
not enough dataNot enough history yet
We need at least two weeks of observations from two or more stores before we will call a price good or bad.
This is a description of what we observed, not a prediction. We do not forecast future prices.
Market price snapshot
Against the rest of the category
Printer Parts →Among the 25 printer parts products we hold a current price for, this sits in the dearest 28%.
Category figures are computed from the prices we currently hold across every store we track, not from a manufacturer’s list. They move as the catalogue does.
Alternatives worth comparing
Raise3D Hot End Assembly
Bondtech BMG Extruder Standard / BMG
Slice Engineering Copperhead™ Heat Break Standard
Bambu Lab Replacement Filament Cutter (3 Pack) P2S
Slice Engineering Copperhead™ Heat Sink Groove Mount
Micro Swiss Plated Wear Resistant Nozzle for Creality Spider Hotend 0.6mm
How UponSale tracks this product
Stores compared
$1.50 spreadData provenance
- Stores
- 3 tracked
- Fresh offers
- 1
- Observations
- 2 days recorded
- Last update
- 1d ago
- First tracked
- August 28, 2026
- Lowest ever seen
- $24.99
Every price above was read from a retailer’s own published data and stored with its timestamp. The history is ours, not a retailer’s claim.
How we calculate this
Where prices come from. We read the product data each retailer publishes on its own site, unhurriedly and within the rules that retailer sets. We never work around an access control and we never buy collected data of uncertain provenance.
What “verified” means. An offer can win best price only if it is inside our freshness window, matched to the exact variant, in stock, and free of an unresolved price anomaly. “Best verified price” means lowest among the fresh offers we track — not the lowest price on the internet.
How history works. Every price we observe is stored with its source and timestamp. Daily market low, median and high come from those observations, so the price history on this page is ours, not a retailer’s claim.
What we exclude. Stale offers, mismatched variants, bundles compared against single items, and prices that move implausibly without corroboration from another store.
Images. Product photographs come from the retailer they sit beside, loaded from their own image host. We do not re-host them and claim no rights in them.